Different Nozzle Size and Offset from Printbed

AstroPrint Cloud Service
#1

Hello there!

I have a creality cr-10s 500x500x500mm so i have change the nozzle vom 0.4 to 0.6mm.
When i print PETG i have a offset from the Printbed that must be 0.1mm, otherwise i cant
remove the part after printing.
My question where can i change in the default clound-cura settings the Nozzle size and the printbed offset?

thanks,

andy

#2

You need to create a custom setting for your printer/material combination. It’s under the icon “My slicer settings”