Anyone know what I need to do to get this dongle working with AP??
@Anthony I don’t think this dongle is supported. See https://astroprint.zendesk.com/hc/en-us/articles/203641685-Which-WiFi-USB-dongles-are-supported-
Nonetheless if you’re savvy in Linux networking configuration, you can edit the file:
/etc/astrobox/config.yaml
and add this:
network:
manager: manual
You would need to configure the network yourself using your linux knowledge. This is also an experimental feature.
Sorry to remind you of this topic long long ago.
I know it’s not supported…I followed your guide here. https://blog.astroprint.com/how-to-create-an-astrobox-with-a-raspberry-pi-3/
And according to other guides, I meant to setting ip with ethernet and run Advanced IP scanner to find its ip.
With power on, the LNK light is green. I think the pi should be assigned an ip now.
But unfortunately, I found nothing.
Could you please give some advice? Thank you.
Try going into your router settings and look for Connected Devices – Usually, you can find your RPi ip address there…
Thanks a lot!
It works.
But stuck in connecting it with putty. It said “network error: connection refused”.
Could you please tell me does port 22 set defaultly open in the image?
I have no screen at hand now. So I will try to set static ip days later.
Port 22 is the right one for SSH