Hi!
So im wondering if its possible to import a config bundle for Slic3r that i have from the manufacturer of my 3d printer.
Also Im a owner of a Bigbox from E3D and im wondering if its possible to inquire about 3d printer presets for Astro print?
Cheers.
Martin
We can only import .INI files from the manufacturer dashboard.
So, it would be best to ask the manufacturer to add those settings for their printer. (Since only manufacturers have access to that section).
Ok but how about people that have Slic3r settings they are happy about?
It would be good if it was possible to just import a bundle of setting like the Slic3r software have?
Thanks again.
Hey so the E3d team provide a .INI format aka Slic3r bundle. its not possible to upload this our-self?
BigBox_Slic3r_config_bundle.ini
on
http://wiki.e3d-online.com/wiki/BigBox_Software
Cheers
Righy now, I think the best method would be to configure those same settings and THEN save those custom slicer settings for future use.
This can be done via Advanced Slicer Settings.
As for the .INI file, only the manufacturer is able to do that. Can you possibly ask them? We’d love to have them on our platform!
Yepp i got it mate, il give it a go to try and match the settings manually.
Since in new to 3d printing i was hoping for a easy way to just upload it so i dont miss some settings. I guess will ask the manufacturer for that like you mentioned twice to get the INI uploaded.
Cheers again and thanks for the help.
Absolutely! Apologies for the inconvenience. Don’t hesitate to let us know about any other suggestions you might have! 
– I have already made a note about importing settings.
P.S: If you use Twitter, you can let them know 