[SOLVED] Support for Wanhao Duplicator i3

Printer Support
#11

This is a dump from repetier-host

13:55:23.378 : OpenGL version:4.5.13399 Compatibility Profile Context 15.200.1062.1002
13:55:23.379 : OpenGL extensions:GL_AMDX_debug_output GL_AMD_blend_minmax_factor GL_AMD_conservative_depth GL_AMD_debug_output GL_AMD_depth_clamp_separate GL_AMD_draw_buffers_blend GL_AMD_framebuffer_sample_positions GL_AMD_gcn_shader GL_AMD_gpu_shader_int64 GL_AMD_interleaved_elements GL_AMD_multi_draw_indirect GL_AMD_name_gen_delete GL_AMD_performance_monitor GL_AMD_pinned_memory GL_AMD_query_buffer_object GL_AMD_sample_positions GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_atomic_counter_ops GL_AMD_shader_stencil_export GL_AMD_shader_stencil_value_export GL_AMD_shader_trinary_minmax GL_AMD_sparse_texture GL_AMD_stencil_operation_extended GL_AMD_texture_cube_map_array GL_AMD_texture_texture4 GL_AMD_transform_feedback3_lines_triangles GL_AMD_transform_feedback4 GL_AMD_vertex_shader_layer GL_AMD_vertex_shader_viewport_index GL_ARB_ES2_compatibility GL_ARB_ES3_1_compatibility GL_ARB_ES3_compatibility GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_compute_shader GL_ARB_conditional_render_inverted GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_indirect GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_stencil_export GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_snorm GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_buffer GL_EXT_copy_texture GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_bptc GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_IBM_texture_mirrored_repeat GL_INTEL_fragment_shader_ordering GL_KHR_context_flush_control GL_KHR_debug GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KTX_buffer_region GL_NV_blend_square GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_explicit_multisample GL_NV_float_buffer GL_NV_half_float GL_NV_primitive_restart GL_NV_texgen_reflection GL_NV_texture_barrier GL_OES_EGL_image GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_swap_control
13:55:23.379 : OpenGL renderer:AMD Radeon HD 7700 Series
13:55:23.380 : Using fast VBOs for rendering is possible
13:57:52.035 : Printer reset detected - initalizing
13:57:52.044 : start
13:57:54.702 : N1 M110 *2
13:57:54.702 : N2 M115 *4
13:57:54.702 : N3 M111 S6 *68
13:57:54.708 : N4 T0 *30
13:57:54.708 : N5 M20 *52
13:57:54.709 : N6 M80 *61
13:57:54.709 : N7 M105 *0
13:57:56.851 : Info: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
13:57:56.851 : Free RAM:10732
13:57:56.921 : ok
13:57:56.921 : ok 2
13:57:56.922 : FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
13:57:56.922 : Printed filament:201.54m Printing time:1 days 0 hours 30 min
13:57:56.923 : ok 3
13:57:56.923 : N8 M220 S100 *73
13:57:56.923 : N9 M221 S100 *73
13:57:56.923 : N10 M111 S6 *118
13:57:56.923 : ok 4
13:57:56.923 : ok 5
13:57:56.923 : Begin file list
13:57:56.923 : N11 T0 *42
13:57:56.925 : Cura_14.07.exe 18817812
13:57:56.925 : CURA_WANHAO_EDITION_USER_M 1801928
13:57:56.925 : OK(2015).gcode 8192769
13:57:56.925 : WANHAO_i3_FIRST_RUN-EXPERI 1106749
13:57:56.925 : WANHAO_I3_UNBOXING_AND_HAR 1182426
13:57:56.925 : Woman_Body_Venus_Build.gco 7513203
13:57:56.925 : nobar_sixteen.gcode 7271601
13:57:56.925 : end_two.gcode 1070302
13:57:56.925 : bedend.gcode 994817
13:57:56.925 : Heart Dice.gcode 935140
13:57:56.925 : DrawerDiv_Sml4_01 (4way).g 135247
13:57:56.925 : End file list
13:57:57.117 : Error:Format error
13:57:57.117 : Resend:6
13:57:57.130 : ok
13:57:57.130 : Error:Wrong checksum
13:57:57.130 : Resend:6
13:57:57.130 : ok
13:57:57.130 : Error:Format error
13:57:57.130 : Resend:6
13:57:57.130 : Resend: N6 M80 *61
13:57:57.130 : Resend: N7 M105 *0
13:57:57.130 : Resend: N8 M220 S100 *73
13:57:57.130 : Resend: N9 M221 S100 *73
13:57:57.130 : Resend: N10 M111 S6 *118
13:57:57.130 : Resend: N11 T0 *42
13:57:57.133 : ok
13:57:57.133 : Error:Format error
13:57:57.133 : ok 6
13:57:57.133 : Unknown command:
13:57:57.156 : Error:Wrong checksum
13:57:57.156 : Resend:6
13:57:57.164 : ok
13:57:57.164 : ok 6
13:57:57.164 : ok 7
13:57:57.167 : T:23.76 /0 B:23.83 /0 B@:0 @:0
13:57:57.167 : ok 8
13:57:57.167 : SpeedMultiply:100
13:57:57.167 : ok 9
13:57:57.167 : FlowMultiply:100
13:57:57.167 : ok 10
13:57:57.167 : ok 11
13:57:57.751 : N12 M105 *52
13:57:57.764 : ok 12
13:57:57.764 : T:23.83 /0 B:23.76 /0 B@:0 @:0
13:57:58.755 : wait
13:57:59.762 : wait
13:58:00.769 : wait
13:58:00.816 : N13 M105 *53
13:58:00.817 : ok 13
13:58:00.833 : T:23.76 /0 B:23.76 /0 B@:0 @:0
13:58:01.840 : wait
13:58:02.847 : wait
13:58:03.854 : wait
13:58:03.874 : N14 M105 *50
13:58:03.886 : ok 14
13:58:03.886 : T:23.76 /0 B:23.76 /0 B@:0 @:0
13:58:04.893 : wait
13:58:05.948 : wait
13:58:06.940 : N15 M105 *51
13:58:06.955 : wait
13:58:06.955 : ok 15
13:58:06.956 : T:23.76 /0 B:23.76 /0 B@:0 @:0
13:58:07.945 : wait
13:58:08.953 : wait
13:58:10.001 : N16 M105 *48
13:58:10.040 : ok 16
13:58:10.040 : T:23.76 /0 B:23.83 /0 B@:0 @:0
13:58:11.047 : wait
13:58:12.054 : wait
13:58:13.045 : wait
13:58:13.061 : N17 M105 *49
13:58:13.077 : ok 17
13:58:13.077 : T:23.83 /0 B:23.76 /0 B@:0 @:0
13:58:14.148 : wait
13:58:15.139 : wait
13:58:16.128 : N18 M105 *62
13:58:16.130 : ok 18
13:58:16.146 : T:23.76 /0 B:23.83 /0 B@:0 @:0
13:58:17.137 : wait
13:58:18.240 : wait
13:58:19.192 : N19 M105 *63
13:58:19.199 : ok 19
13:58:19.199 : T:23.83 /0 B:23.76 /0 B@:0 @:0
13:58:20.207 : wait
13:58:21.198 : wait
13:58:22.205 : wait
13:58:22.249 : N20 M105 *53
13:58:22.349 : ok 20
13:58:22.349 : T:23.76 /0 B:23.76 /0 B@:0 @:0
13:58:23.340 : wait
13:58:24.347 : wait
13:58:25.315 : N21 M105 *52
13:58:25.322 : ok 21
13:58:25.322 : T:23.76 /0 B:23.76 /0 B@:0 @:0
13:58:26.328 : wait
13:58:27.335 : wait
13:58:28.342 : wait
13:58:28.373 : N22 M105 *55
13:58:28.374 : ok 22
13:58:28.390 : T:23.76 /0 B:23.76 /0 B@:0 @:0
13:58:29.381 : wait
13:58:30.388 : wait
13:58:31.436 : N23 M105 *54
13:58:31.443 : wait
13:58:31.443 : ok 23
13:58:31.443 : T:23.83 /0 B:23.76 /0 B@:0 @:0

I sent the astrobox logs from astrobox interface.

#12

@DiamondDrake got the logs. There’s seem to be garbage over the line. Are you using the same baud rate as in repetier-host? Also the new release 0.8(1) has a GCODE console app, you could try to send some commands to the printer to see if it responds.

#13

Yes I’m using what the display on the Wanhao says its configured for, 115200, which is the same as I have set in repetier- host.

#14

Did you ever figure this out? I’m seeing the same issue.

#15

Just got my AstroBox in today and am having the exact same issue. I even tried removing the AutoReset jumper and messing with different baud rates (suggestions on the Google Groups page), all to no avail. Has anyone been able to successfully connect a Wanhao i3 to an AstroBox? It would be a shame to have to return my box because they don’t support one of the highest trending / most popular printers on 3D Hubs…

#16

Astrobox has some great features, but the software is essentially a branch of the octoprint with enormous changes. AstroPrint just won’t connect to the WanHao duplicator i3, but the lastes OctoPrint does. If anyone really needs the ease of host control of this type of solution, until the AstroBox team can get the WanHao Duplicator i3 Supported, It looks like OctoPrint is the way to go.

#17

Thanks @DiamondDrake, we will look into the version of Octoprint that supports the i3 and implement the changes. Would you mind to let us know which version of Octoprint we should look into?

#18

The octoprint webui shows “Version: 1.2.8 (master branch)” at the bottom of every page

#19

Hi Guys,
My Duplicator i3 is working fine with my astrobox that I just built.
you can try removing the auto reset jumper on the i3 mbx and see if that work for you.

got this info below from one of the google wanhao user.

“open up the controller box and remove the jumper that says something about Auto Reset. (JP14?) Seen as the jumper on the right side, middle edge of the board here. That is the only thing that would really cause issues. As long as you have the baud rate the same and the same com port (and Repetier host is closed) it should work
http://3dprinterbrain.com/pmwiki.php/DupI3/PrinterBoardInfo?action=dispimg&im=i3board.p.png”

#20

I haven’t tried removing the auto-reset jumper, but I installed a fresh copy of astrobox on my raspberry pi, used a powered usb hub, high quality cables, and nothing. Is there some significance to this jumper? The controller does reset, but octoprint handles that just fine.

#21

Do you guys have the microsd card inserted on the printer?

I has having issues connecting as well, but looking at the serial logs, for some reason the board will give some errors if you don’t have the microsd present. I didn’t have to mess with any jumpers…

Try that and report back.

#22

I’m having a similar issue here. I also have a duplicator i3 (there are different versions out there, and I’m not sure which one I have). I have been using octoprint successfully for a few months, and I decided to try astroprint (for its cloudiness) and I’m not able to connect my printer.

This is from the astroprint serial log:

2015-12-21 17:04:18,948 - SERIAL - DEBUG - Connecting to: /dev/ttyUSB0
2015-12-21 17:04:18,958 - SERIAL - DEBUG - Connected to: Serial<id=0x6cdbf330, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2015-12-21 17:04:18,963 - SERIAL - DEBUG - Changing monitoring state from 'Opening serial port' to 'Connecting'
2015-12-21 17:04:20,967 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:22,971 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:24,975 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:26,979 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:28,984 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:30,988 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:32,992 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:34,997 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:37,001 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:37,991 - SERIAL - DEBUG - Recv: start
2015-12-21 17:04:39,999 - SERIAL - DEBUG - Send: M105
2015-12-21 17:04:41,809 - SERIAL - DEBUG - Recv: Info: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2015-12-21 17:04:41,812 - SERIAL - DEBUG - Changing monitoring state from 'Connecting' to 'Closed'
2015-12-21 17:04:41,818 - SERIAL - DEBUG - Connection closed, closing down monitor

I’m not siting at my printer, but I’m guessing that it’s restarting, which closes the serial port, and then astroprint fails to connect. This is just a guess. I have a microSD installed, and I haven’t removed the jumper. I don’t have a serial log from octoprint, but I do have my configs, and I can get a log if it’s helpful.

#23

I watched it when I hit the “test-connection” button. Sure enough, I got the Rhino screen of death (or rebirth) which happens at startup. I opened it up, and removed that jumper. Things are working (and I’m printing now). This is the snippet from the functioning log:

2015-12-21 17:16:11,889 - SERIAL - DEBUG - Changing monitoring state from 'Offline' to 'Opening serial port'
2015-12-21 17:16:11,900 - SERIAL - DEBUG - Connecting to: /dev/ttyUSB0
2015-12-21 17:16:11,907 - SERIAL - DEBUG - Connected to: Serial<id=0x6cdbf630, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2015-12-21 17:16:11,910 - SERIAL - DEBUG - Changing monitoring state from 'Opening serial port' to 'Connecting'
2015-12-21 17:16:12,123 - SERIAL - DEBUG - Recv: wait
2015-12-21 17:16:12,125 - SERIAL - DEBUG - Send: M105
2015-12-21 17:16:12,129 - SERIAL - DEBUG - Recv: ok 0
2015-12-21 17:16:12,130 - SERIAL - DEBUG - Changing monitoring state from 'Connecting' to 'Operational'

The remaining open questions are:

  1. Is the reset functionality desired? I’m not sure. I bet there are two camps, and I’m now forced to live in one of them.
  2. Can astroprint support a reset? Even if this isn’t the perfect behavior, it’s better to fix it in astroprint than making duplicator owners each fix it.
  3. Can the error messages be improved? The webpage just sits there spinning, but the serial connection was clearly closed. There was no more action taking place.
#24

That jumper is required In order to flash new firmware, not that you’d necessarily want to do that. But if octoprint handles the reset just fine (it does because I use it everyday) then it stands to reason that astroprint could too. That way users don’t have to open their control box.

Now that we have some confirmation on the reset causing issues maybe the astroprint team can support that

#25

Well, now at the end of the print, I get a different error. Here’s another snippet:

...
2015-12-21 17:41:04,648 - SERIAL - DEBUG - Send: N22430 G1 F1800 X112.754 Y115.576 E1170.34227*56
2015-12-21 17:41:04,702 - SERIAL - DEBUG - Recv: ok 22429
2015-12-21 17:41:04,704 - SERIAL - DEBUG - Send: N22431 G1 X113.131 Y115.671 E1170.35517*83
2015-12-21 17:41:04,726 - SERIAL - DEBUG - Recv: ok 22430
2015-12-21 17:41:04,728 - SERIAL - DEBUG - Send: N22432 M107*32
2015-12-21 17:41:04,754 - SERIAL - DEBUG - Recv: ok 22431
2015-12-21 17:41:04,756 - SERIAL - DEBUG - Send: N22433 G1 F3600 E1166.35517*49
2015-12-21 17:41:04,823 - SERIAL - DEBUG - Recv: ok 22432
2015-12-21 17:41:04,826 - SERIAL - DEBUG - Send: N22434 G0 F6000 X113.131 Y115.671 Z7.579*22
2015-12-21 17:41:04,844 - SERIAL - DEBUG - Recv: ok 22433
2015-12-21 17:41:04,846 - SERIAL - DEBUG - Send: N22435 M107*39
2015-12-21 17:41:04,849 - SERIAL - DEBUG - Recv: Fanspeed:0
2015-12-21 17:41:04,852 - SERIAL - DEBUG - Recv: ok 22434
2015-12-21 17:41:04,854 - SERIAL - DEBUG - Send: N22436 G91*16
2015-12-21 17:41:04,920 - SERIAL - DEBUG - Recv: ok 22435
2015-12-21 17:41:04,922 - SERIAL - DEBUG - Send: N22437 G1 Z0.3 F5000*28
2015-12-21 17:41:04,948 - SERIAL - DEBUG - Recv: ok 22436
2015-12-21 17:41:04,951 - SERIAL - DEBUG - Send: N22438 T0*53
2015-12-21 17:41:04,954 - SERIAL - DEBUG - Recv: ok 22437
2015-12-21 17:41:04,956 - SERIAL - DEBUG - Send: N22439 G1 E-1*95
2015-12-21 17:41:04,959 - SERIAL - DEBUG - Recv: ok 22438
2015-12-21 17:41:04,961 - SERIAL - DEBUG - Send: N22440 M104 T0 S0*33
2015-12-21 17:41:05,038 - SERIAL - DEBUG - Recv: ok 22439
2015-12-21 17:41:05,041 - SERIAL - DEBUG - Send: N22441 G90*17
2015-12-21 17:41:07,045 - SERIAL - DEBUG - Read communication timeout during printing, listen again
2015-12-21 17:41:07,985 - SERIAL - DEBUG - Recv: ok 22440
2015-12-21 17:41:07,992 - SERIAL - DEBUG - Send: N22442 M105*37
2015-12-21 17:41:08,000 - SERIAL - DEBUG - Recv: ok 22441
2015-12-21 17:41:08,003 - SERIAL - DEBUG - Send: N22443 G28 X0*88
2015-12-21 17:41:08,020 - SERIAL - DEBUG - Recv: TargetExtr0:0
2015-12-21 17:41:08,058 - SERIAL - DEBUG - Recv: Printed filament:1393.89m Printing time:10 days 6 hours 36 min
2015-12-21 17:41:08,064 - SERIAL - DEBUG - See astrobox.log for details
2015-12-21 17:41:08,065 - SERIAL - DEBUG - Changing monitoring state from 'Printing' to 'Error: See astrobox.log for details'
2015-12-21 17:41:11,859 - SERIAL - DEBUG - Recv: ok 22442
2015-12-21 17:41:11,864 - SERIAL - DEBUG - Recv: ok 22443
2015-12-21 17:41:11,867 - SERIAL - DEBUG - Recv: T:212.22 /0 B:45.04 /45 B@:0 @:0
2015-12-21 17:41:11,870 - SERIAL - DEBUG - Recv: X:0.00 Y:115.68 Z:7.88 E:1165.35
2015-12-21 17:41:11,871 - SERIAL - DEBUG - Recv: wait
2015-12-21 17:41:12,841 - SERIAL - DEBUG - Recv: wait
2015-12-21 17:41:13,841 - SERIAL - DEBUG - Recv: wait
...

The astrobox.log:

2015-12-21 17:17:13,705 - octoprint.server.util - INFO - New connection from client: 10.0.2.90
2015-12-21 17:41:08,060 - astroprint.printer.marlin.comm - ERROR - Something crashed inside the serial connection loop, please report this to AstroPrint:
Traceback (most recent call last):
  File "platforms/common/AstroBox/src/astroprint/printer/marlin/comm.py", line 950, in _monitor
  File "platforms/common/AstroBox/src/astroprint/printer/marlin/comm.py", line 1094, in _handleResendRequest
ValueError: invalid literal for int() with base 10: 'filament:1393.89m'

The printer was sitting there with the bed on, and the steppers engaged. The hotend was off, thankfully, but that might have just been lucky. The print was fine, FYI.

Looking at it a little more, this might also be helpful:

2015-12-21 17:45:03,706 - SERIAL - DEBUG - Recv: wait
2015-12-21 17:45:04,798 - SERIAL - DEBUG - Recv: wait
2015-12-21 17:45:05,341 - SERIAL - DEBUG - Changing monitoring state from 'Error: See astrobox.log for details' to 'Closed'
2015-12-21 17:45:05,357 - SERIAL - DEBUG - Changing monitoring state from 'Offline' to 'Opening serial port'
2015-12-21 17:45:05,367 - SERIAL - DEBUG - Connecting to: /dev/ttyUSB0
2015-12-21 17:45:05,375 - SERIAL - DEBUG - Connected to: Serial<id=0x6d098090, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2015-12-21 17:45:05,376 - SERIAL - DEBUG - Changing monitoring state from 'Opening serial port' to 'Connecting'
2015-12-21 17:45:05,798 - SERIAL - DEBUG - Recv: wait
2015-12-21 17:45:05,800 - SERIAL - DEBUG - Send: M105
2015-12-21 17:45:05,803 - SERIAL - DEBUG - Unexpected error while reading serial port: TypeError: 'an integer is required' @ comm.py:_readline:1034
2015-12-21 17:45:05,805 - SERIAL - DEBUG - Connection closed, closing down monitor
2015-12-21 17:45:05,809 - SERIAL - DEBUG - Recv: ok 22443
2015-12-21 17:45:05,810 - SERIAL - DEBUG - Changing monitoring state from 'Connecting' to 'Operational'
#26

Thanks for those logs!

It seems that this line

2015-12-21 17:41:08,058 - SERIAL - DEBUG - Recv: Printed filament:1393.89m Printing time:10 days 6 hours 36 min

is causing problems for our software as it’s not a standard Marlin response. I now have some more info to take a look at this problem.

#27

I just setup AstroPrint with my Monoprice Maker Select which is a duplicator i3 rebrand and was having the same problem until I put the sd card in like Carlos suggested it then connected instantly.

1 Like
#28

As of AstroBox version 0.8(4), the i3 is working fine. Please update your software to the latest.

#29

I’ve tried everything suggested in this thread and I am having no luck getting astroprint to work with my Cocoon printer (rebranded Wanhao DI3).

Is the Wanhao still working with Astrobox v0.10(4)?

#30

@tanka2d: Yup!

Unless cocoon modified the firmware when they rebranded it…