With the latest software (0.7), the time remaining is counting up instead of down. The file shows the correct 4 hour estimated time. But the time remining during printing shows 00:00:00 and starts counting time that has passed since the start lf the print.
Ed
Edit: this was on an stl file, that was converted to gcode on astroprint cloud using Cura and custom filament settings.
Tried to upload a video clip, but wasnt allowed. Try a link. youtube link
Check the file info at AstroPrint.com. Is it 0:0:0 there? We now set the time to 0 instead of failing the slice when we can’t determine the print time.
When you successfully print the file once, the box will remember the time it took and show you the right countdown.