So I’m new to 3d printing. Just got my printer Monday. I’ve tried several times to print mini figs and at about the same height in each attempt the x axis has shifted right and left for multiple layers. I’ve checked belt tension and gears on motor. Tried 2 different stl’s and same problems at about the same height. Even tried slower speeds and still same problems. Never happens on first layers, always about 1/4 of an inch up then again at 1/2 or so. I’m running anycubic kobra/ kobra neo profile temp 215/60 print speeds of 60-100mm/s supports on. I’ve only have a android tablet so i slice online download the gcode put on sd card put in printer and go. Am I missing something? Any help would be appreciated thanks!
