Hi everyone,
here in Germany (and I think in US too) the Anycubic i3 is real popular - it’s nearly full assembled (only 8 screws!) and it works out of the Box. I have integrated as a custom printer, but everytime i print i get the message that this is maybe a custom printer slice etc. than I got a
fail message and after several time it start.Can you please support the i3 Mega please!!
This isn’t a problem with the printer at all. The problem is likely your AstroBox’s network connection.
Thank you Daniel, this is mysterious because my box is near the access point (about 1 meter without walls).
Anyway can you add the Anycubik i3 mega? Thanks
Hi,
Any news about Supporting I3 Mega? Thank you
Anycubic I3 Mega still isn’t included in printers -
Yes - iam feeling ignored 
it’s one of the best selling printers on Amazon i don’t understand why :-/
Simply because we don’t have one, the manufacturer is not involved with us. Because of this we have no way to create a profile that can be successfully verified.
Can i help you? We have a hudge Community here just Tell me what u Need
At a minimum we would need the values of the printer profile including start/stop gcode that works for you.
After that If can get advanced slicer settings for the 3 supported qualities for your favorite slicer, it would be even better
Cura 3 has the best settings for the i3 Mega - can you export and import there is a start und end gcode to
Hi Daniel,
The i3 Mega is listed here https://www.astroprint.com/compatible-3d-printers so maybe the data is available to you. If not, can you send us a complete list of what is needed?
Orin
No, that list only list printers that can communicate with our controller and are compatible. It doesn’t mean we have a slicing profile for them. As a user, you can create your own custom profile.
Typically we work with the manufacturer to create these profiles in the system but we don’t have a relationship with Anycubic. We would need all the data that our system asks when creating a custom printer profile.
@Paul2 du bist warscheinlich deutsch kannst du mir deine Print Profile einstellungen für den i3 mega schicken?
Lg Hannes
Leider kann man die Slicer Settings nicht exportieren 
aber zumindest die Settings kann ich dir senden
Nozzle Diameter: 0.4 mm
Filament Diameter: 2.85 mm
Start
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 ; Home the axis I hope
G1 Z15.0 F3600 ;move the head up 15
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm
G92 E0 ;zero the extruded length again
G1 F3600
End
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off
M107 ;fan off
G90
G92 E0 ;zero the extruded length
G1 E-1 F300 ;retract the filament a bit
G91 ;relative positioning
G1 Z10 ;Move up Z 10mm
G90 ;back to absolute mode
G1 Y200 F5000 ;Move bed forward
M84 ;steppers off
M300 P300 S4000
So seit heute kann ich nicht mehr drucken 
I think it´s best to speak two languages here, so I´ll first write in English, then in German.
Hey Paul- thank you VEEEERY MUCH!!! for the information about the settings for my Anycubic i3.
It all works out fine.
My first print was a scramble, but only because I did not set the support options myself.
The Details of the figure were nice where unscrambled.
Hey Paul.
Danke, Alter!!!
Das haut richtig gut hin mit den Einstellungen, die Du hier rein geschrieben hast.
Zwar ist mein erster Druck damit ne Katastrophe geworden. Aber nur, weil man hier halt die Supports zwingend selbst einstellen muss und nicht, wie bei Cura, einfach nur den Haken bei Supports setzt und fertig. Kannst aber dafür ein Profil anlegen.
Jetzt druckt er grade das zweite Modell.
Diese Einstellungen sind schwer zu finden. Danke noch mal.
@ Support:
The i3 Mega and the Photon are extremely good for their low price.
I ask you to at least highlight these hard to find settings if you are not capable of simply asking Anycubic yourself.
Otherwise your marvellous platform is not up to date 
